Design Research Optics
East Greenwich, Rhode Island 02818-1534 USA
401-885-7353 • Fax: 401-884-5156
Email: sales@DesignResearchOptics.com
Turning Mirrors, Silicon
TMS-DBMR Dual-Band Max Reflector for CO2 + RED LASER DIODE REFLECTANCE
These turning mirrors are used in C02 laser beam delivery systems. Silicon is the most commonly used mirror substrate due to its good "figure of merit" properties. We offer them with a variety of metal and dielectric coatings.
| Model Number |
Diameter |
Thickness |
| TMS-0512-DBMR | 0.500" | 0.120" |
| TMS-0712-DBMR | 0.750" | 0.120" |
| TMS-0912-DBMR | 0.875" | 0.120" |
| TMS-1012-DBMR | 1.000" | 0.120" |
| TMS-1112-DBMR | 1.100" | 0.120" |
| TMS-1512-DBMR | 1.500" | 0.120" |
| TMS-1516-DBMR | 1.500" | 0.160" |
| TMS-1816-DBMR | 1.750" | 0.160" |
| TMS-2020-DBMR | 2.000" | 0.200" |
| TMS-2525-DBMR | 2.500" | 0.250" |
| TMS-3025-DBMR | 3.000" | 0.250" |
| TMS-4035-DBMR | 4.000" | 0.350" |
Specifications:
Material: Silicon (Si) Single Crystal
Diameter Tolerances: +.000” -.005”
Thickness: ±.010”
Flatness: 1/40 wavelength @ 10.6 µm
Parallelism: < 3 minutes of arc
Surface Quality: < 40/20 scratch dig Laser Finish
Spectral Performance:
TMS-DBMR Turning Mirrors Silicon with Dual Band Max Reflectance coating
Coated: Reflectance > 99.7% average @ 10.6 µm
Reflectance: > 85% average for .633 µm and .650 µm
45° Angle Of Incidence
Absorption: < .30% @ 10.6 µm
This is not a low phase shift mirror design; if you need this, please see our Series "ZPR".
|
Site content current to May 2012
Copyright © Design Research Optics
|